Leviton 4-Port Manuel d'utilisateur télécharger pdf

10/100/1000 Mbps 4-Port Gigabit Router

The 10/100/1000 Mbps 4-Port Gigabit Router is an easy-to-use router that offers small

ofﬁce and home ofﬁce (SOHO) an economical way to connect an entire local area

network (LAN) to the Internet using an external DSL/Cable Modem.

Follow this Quick-Start Guide to mount the Router into your Structured Media™ Center

(SMC), and conﬁgure it for normal network operation.

PRE-INSTALLATION CHECKLIST

To install the Router, you must have the following:

• A network interface card (NIC) installed in your computer. (Gigabit network card

required for gigabit speeds to be attained.)

• An external Cable or DSL modem with an RJ-45 port.

• (4) patch cords with RJ-45 connectors. Leviton Category 5e Performance Patch

Cords are recommended.

• A Leviton Category 5e or Category 6 Voice and Data Module located in an SMC.

• At least 2 Category 5e or Category 6 data connectors (in addition to any desired

telephone jacks), wired back to the Category 5e Voice and Data Module with

Category 5e cable. Mark these two connectors and corresponding ports “A” and “B”.

(Figure 2, page 5)

• An operational Internet connection/ISP.

• A Web browser installed on your computer.

• Speciﬁc ISP information for your broadband connection service; including: type of

protocol (PPPoE, Dynamic IP, or Fixed IP) and pertinent login information.

NOTE: Category 5e or Category 6 products are required for gigabit operation.

IMPORTANT INSTRUCTIONS

1. Read and understand all instructions. Follow all warnings and instructions marked

on the product.

2. Do not use this product near water—e.g., near a tub, wash basin, kitchen sink or

laundry tub, in a wet basement, or near a swimming pool.

3. Never push objects of any kind into this product through openings, as they may

touch dangerous voltages.

4. SAVE THESE INSTRUCTIONS.

SAFETY INFORMATION

1. Never install communications wiring or components during a lightning storm.

2. Never install communications components in wet locations unless the components

are designed speciﬁcally for use in wet locations.

3. Never touch uninsulated wires or terminals unless the wiring has been disconnected

at the network interface.

4. Use caution when installing or modifying communications wiring or components.

Quick-Start Guide

47611-GB4

59-25 Little Neck Parkway.

Little Neck, N.Y. 11362-2591, USA

Tech Support: 800-824-3005

www.leviton.com

For Technical Assistance Call:

1-800-824-3005 (U.S.A. Only)

or Fax:

1-800-824-9538 (U.S.A. Only)

www.leviton.com DI-045-47611-05A 1

1 2 3 4 5

Résumé du contenu

Page 1 - 47611-GB4

10/100/1000 Mbps 4-Port Gigabit RouterThe 10/100/1000 Mbps 4-Port Gigabit Router is an easy-to-use router that offers small ofﬁce and home ofﬁce (SOHO

Page 2 - 7DI-045-47611-05A2

Installation:Align the mounting pins with the grid holes on the back of the enclosure. With the mounting pin plungers in the “out” position, press the

Page 3 - 3DI-045-47611-05A6

4. Use one of the four Performance Patch Cords to connect the computer’s Ethernet port to the data connector marked “B”.5. At the SMC, locate the Ro

Page 4 - 5DI-045-47611-05A4

FCC STATEMENT:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. T

Page 5 - Overall size:

This page is NOT to be printed in the bookletDOCUMENTATIONLEVITON INSTRUCTION SHEET/MANUALSPECIFICATIONSHSZ 03/08/07HelveticaDI-045-47611-05ABlackN/AF

Commentaires sur ces manuels

Pas de commentaire

Leviton 4-Port Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Mise en réseau Leviton 4-Port. Leviton 4-Port User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels